Audio Video Devices
Description
This converter adapts VGA-type RGBHV video sources to Y, Pb and Pr component
video for use with high-definition televisions (HDTVs). Simply connect the converter to an
HDTV source (i.e. high-definition set-top box, satellite receiver with HDTV outputs, etc.)
or a PC using the supplied 6-ft. VGA cable and power it up with the included 12-volt AC
adapter. Connect the output of the converter to the HDTV and you're done! 8
Features
You can also connect the VGA output of your computer to drive your HDTV-compatible
set. If your PC's output is set to 640x480, the signal will be converted to the 480p mode
on your HDTV. The 960x540 video modes on a computer can be displayed on HDTV
sets that can do the 1080i mode. Some sets, which support 720p mode, can handle display
computer resolutions of (1280x720). A monitor utility program like PowerStrip for
Windows will be needed to fine-tune the computer's VGA output for the HDTV. Note:
This converter is not intended to connect a PC to a standard-definition television.
Note: These units are not format converters. They pass the horizontal and vertical
synchronization timings and pixel content to the outputs without modification.
Specifications
Audio Authority Product No.: 9A60 VGA/COMP CONVERTOR
Input: RGB video on standard VGA connector, color per SMPTE 274
RGB Video Input: .7 volt p-p
Input Synchronization: Negative composite bi-level sync on Y input
Output: Y/Pr/Pb component video on RCA jacks
Video Output: .7 volt p-p Y,+.35 volt p-p Pr and Pb
Output Synchronization: RGBHVseparate horizontal and vertical negative TTL sync
RGBScomposite negative TTL sync on H and V output ports
Video Bandwidth: -3dB @ 250MHz
Dimensions: 5 1/2" x 4 1/4" x 1 4/5"
not including mounting flanges
Included Accessories: 6-foot RGB RCA patch cable
12V DC power pack
This converter adapts VGA-type RGBHV video sources to Y, Pb and Pr component
video for use with high-definition televisions (HDTVs). Simply connect the converter to an
HDTV source (i.e. high-definition set-top box, satellite receiver with HDTV outputs, etc.)
or a PC using the supplied 6-ft. VGA cable and power it up with the included 12-volt AC
adapter. Connect the output of the converter to the HDTV and you're done! 8
Features
You can also connect the VGA output of your computer to drive your HDTV-compatible
set. If your PC's output is set to 640x480, the signal will be converted to the 480p mode
on your HDTV. The 960x540 video modes on a computer can be displayed on HDTV
sets that can do the 1080i mode. Some sets, which support 720p mode, can handle display
computer resolutions of (1280x720). A monitor utility program like PowerStrip for
Windows will be needed to fine-tune the computer's VGA output for the HDTV. Note:
This converter is not intended to connect a PC to a standard-definition television.
Note: These units are not format converters. They pass the horizontal and vertical
synchronization timings and pixel content to the outputs without modification.
Specifications
Audio Authority Product No.: 9A60 VGA/COMP CONVERTOR
Input: RGB video on standard VGA connector, color per SMPTE 274
RGB Video Input: .7 volt p-p
Input Synchronization: Negative composite bi-level sync on Y input
Output: Y/Pr/Pb component video on RCA jacks
Video Output: .7 volt p-p Y,+.35 volt p-p Pr and Pb
Output Synchronization: RGBHVseparate horizontal and vertical negative TTL sync
RGBScomposite negative TTL sync on H and V output ports
Video Bandwidth: -3dB @ 250MHz
Dimensions: 5 1/2" x 4 1/4" x 1 4/5"
not including mounting flanges
Included Accessories: 6-foot RGB RCA patch cable
12V DC power pack
| Questions? Call Toll Free 1-800-407-8011 Monday-Friday 8am-6pm PST or email us at sales@m2cables.com |
| Conditions of Use Security Info Shipping Info Customer Care Copyright @ 2007 M2Cables and its licensors. All Rights Reserved. |
